BummerJob.com

[full-time] Inspector Engineering Specialist at Travis County Human Resources

2009-12-08 10:44:31

Location: Texas
URL: http://www.TravisCountyJobs.org

Description:

Position Title Code: 6641-3-16663-49-0601 NEW

Deadline: Until Filled

Department: Transportation & Natural Resources

Salary: $17.36 – $21.70 Hourly. Commensurate with experience.

Duties and Responsibilities
Inspects construction activities to assess compliance and effectiveness of Storm Water Pollution Prevention Plans (SWP3s), erosion, sediment controls, and storm water drainage Best Management Practices (BMPs). Inspections and GPS mapping of County drainage structures. Communicates and coordinates effectively with County staff, other Agencies, design engineers, contractors, and the public. Assistance with other Storm Water Management Program (SWMP) duties as assigned.

Minimum Requirements
Associate’s degree in a related Engineering discipline AND two (2) years related increasingly responsible inspection work experience;
OR,
Any combination of education and experience that has been achieved and is equivalent to the stated education and experience and required knowledge, skills, and abilities sufficient to successfully perform the duties and responsibilities of this job.

License: *Possession of a valid Texas Driver’s License.

Preferred: *Any combination of experience, education and training equivalent to three (3) years or more in inspection or design of Storm Water Pollution Prevention Plans (SWP3s), erosion/sediment controls, storm water Best Management Practices (BMPs), and drainage construction. *Bachelor’s degree or course work in civil engineering, natural or environmental sciences/studies, or a related field. *Knowledge and skill in assesment and communication of storm waer pollution prevention best management practices, erosion and sediment control, drainage engineering and construction. *Knowledge of local soils, vegetation, environment, and regulations. *Professional storm water certification, such as CESSWI, CIESC or CPESC.

Hours: 8:00 AM to 5:00 PM and works some holidays

Work site: 411 West 13th Street

CRIMINAL, DRIVING & EMPLOYMENT BACKGROUND CHECK REQUIRED

APPLICATION INSTRUCTIONS: Download the Travis County Employment Application at www.TravisCountyJobs.org and submit with resume to resumes.hr@co.travis.tx.us or direct mail to: Travis County-HRMD, 1010 Lavaca Street, Austin, TX 78701. (512) 854-9165.

Apply to this job

[full-time] Design Engineer ( Mechanical) at David Anthony Group, Inc

2009-02-17 07:22:22

Location: Ohio
Description:

SR. Design Engineer, Dayton, OH area

Design equipment and guide, coach, mentor mechanical engineers and tech’s.

lead work on assigned projects developing scopes of work, systems operations, designs of equipment utilizing AutoCAD design software, as well as MS Office products, and other engineering software.

Lead interaction with the sales staff and engineering group to determine/verify project scope and operation.

To run hand calculations to size and select all of the necessary equipment such as pumps, valves, housings etc.; as well as assisting other mechanical engineers in performing these duties.

Participation and leading of project review meetings to help determine the designs to be detailed, and changes/updates that will need to be documented in CAD, on design calculations, and in the BOM.

Develop and deliver equipment/control submittal drawings and required support documentation.

Write functional equipment manuals for designed equipment.

Perform design calculations for a variety of mechanical devices.

Perform sign-off for a drawing release to manufacturing/field.

Work with manufacturing on the construction and assembly of projects on the shop floor.

Degree in Mechanical Engineering or similar program

8 plus years of relevant experience including previous leadership roles

Proficient with AutoCAD 2D software.

Some travel will be required.

Relo Assistance

Email resume to davidanthony99@juno.com

Key words pumps, valve, flow control, rotating equipment, fluid equipment, water, pipe, machine, product engineer, development engineer, project engineer,design engineer equipment

Apply to this job

[full-time] Design Engineer at David Anthony Group, Inc

2008-12-22 14:27:23

Location: Ohio
Description:

Design Engineer, Dayton OH

Design equipment utilizing AutoCAD design software.

Design calculations for a variety of mechanical devices.

Work with manufacturing on the construction and assembly of projects on the shop floor.

Work with the purchasing and suppliers to gather the information required to create the detailed designs.

Interact with the sales staff and engineering group to determine/verify project scope and operation.

B.S. Degree in Mechanical Engineering

3 to 5 years of experience

Travel of up to 25% will be required.

Relocation Assistance

Email resume to davidanthony99@juno.com

Apply to this job

[full-time] Lead Mechanical Design Engineer at David Anthony

2008-11-22 05:28:33

Location: Ohio
Description:

Lead Mechanical Design Engineer, Dayton, OH area

To lead work on assigned projects developing scopes of work, systems operations, designs of equipment utilizing AutoCAD design software, as well as MS Office products, and other engineering software.

Lead interaction with the sales staff and engineering group to determine/verify project scope and operation.

To run hand calculations to size and select all of the necessary equipment such as pumps, valves, housings etc.; as well as assisting other mechanical engineers in performing these duties.

Participation and leading of project review meetings to help determine the designs to be detailed, and changes/updates that will need to be documented in CAD, on design calculations, and in the BOM.

Perform design calculations for a variety of mechanical devices.

Perform sign-off for a drawing release to manufacturing/field.

Work with manufacturing on the construction and assembly of projects on the shop floor.

Guide, coach, mentor mechanical engineers and tech’s.

Degree in Mechanical Engineering or similar program

5 plus years of relevant experience including previous leadership roles

Proficient with AutoCAD 2D software.

Travel of up to 25% will be required.

Relo Assistance

Email resume to davidanthony99@juno.com

Apply to this job

[full-time] Maintenance Project Manager ( Facilities Project Manager) at Travis County Government

2008-10-23 09:42:38

Location: Texas
URL: http://www.TravisCountyJobs.org

Description:

Position Title Code: 6086-2-23277-14-0135

Deadline: Until Filled

Department: Facilities Management

Salary: Commensurate with experience

Essential Functions

Performs planning and design work for building construction, renovation and repair projects. Plans, designs and develops specifications and drawings for facilities maintenance, repair and renovation work. Ensures that professional consultants provide appropriate services related to program and scope requirements of design projects. Reviews bids and makes award recommendations for projects. Job duties will require project scheduling, estimating and planning as well as representing the County on renovation and repair projects. Ensures contractors comply with plans and specifications for renovation and repair projects.

Required Qualifications
Bachelor’s degree in Architecture, Structural, Mechanical, Electrical or Civil Engineering AND two (2) years of directly related increasingly responsible professional architectural or engineering planning, design or construction, licensed Professional Architect or Professional Engineer, including one (1) year of lead, management or project management experience.

License: *Possession of a license as a Registered Architect or Professional Engineer (P.E.) in the State of Texas, if licensed in another state, must acquire license reciprocity in the State of Texas within six months of hire. *Possession of a valid Texas Driver’s License.

Preferred: Experience in facilities maintenance and competence with AutoCAD.

Hours: 8:00 AM to 5:00 PM

Work site: 1010 Lavaca Street

CRIMINAL, EDUCATION & EMPLOYMENT BACKGROUND CHECK REQUIRED

Download the Travis County Employment Application at www.TravisCountyJobs.org and submit with resume to resumes.hr@co.travis.tx.us or direct mail to: Travis County-HRMD, 1010 Lavaca Street, Austin, TX 78701. (512) 854-9165.

Apply to this job

[full-time] Mechanical Engineer at Rachel Straub

2008-09-20 17:25:31

Location: New York
Description:

Role purpose
Current on-going work and potential work including NAVFAC Mid-Atlantic work .
Essence of role – key accountabilities
Work on a team of process and piping engineers for design of petrochemical, natural gas and LNG systems for port terminals.
Job requirements
Technical / professional expertise
• System criteria development
• System concept development
• System sizing
• PFD/P&ID development
• Piping material selection
• Stress calculations
• Specification writing for systems and equipment
• Oversee piping layout and drawing review
• Field inspections
• Report writing
• Work well on a team
• Good verbal and communication skills
• AutoCAD training
• Knowledge of ANSI, ASME and API codes
• Familiarity with instrumentation systems
• Petrochemical a plus
• P E License a plus
Essential: BSME
Desirable: Engineering experience in marine environments
• Minimum 10 years experience
• Bachelors Degree in engineering
• Knowledge of process equipment (tanks, pumps etc.)
Interested?
Company Offers:
• Competitive base compensation package
• 100% Company paid premiums for employee and family that includes: medical (PPO), prescription, dental and vision coverage
• Short-term disability / salary continuation
• Long-Term disability (optional)
• Employee assistance program
• Life Insurance and optional Supplemental AD&D
• 401(k) with 50% match up to 6% of base pay
• Flexible Spending Accounts (Health and Dependent Care)
• Employee Company Share Purchase program
• Professional development (training programs, tuition reimbursement

Apply to this job

[full-time] Mechanical Engineer at Rachel Straub

2008-09-20 17:24:06

Location: Virginia
Description:

Apply to this job

[full-time] Principal Electric Engineer at Rachel Straub

2008-09-20 17:15:42

Location: Virginia
Description:

Key role objective
Work on a team of Electrical Engineers to perform analysis and design of electrical systems for port terminals and other maritime facilities.
Key areas of responsibility
• Electrical power design and analysis
• System concept and criteria development
• Complete design and specification of medium voltage primary and standby power systems, lighting, fire alarm and special electrical systems
• Code research and interpretation
• Field investigations
• Project design and construction phase meetings
• Report and specification writing
• Construction administrative services (RFIs, submittal reviews, inspections)
• Team organization/supervision
• Coordination with other disciplines and CAD functions
Key requirements
• Knowledge of NEC and other applicable codes
• Work well on a team
• Good verbal and communication skills
• P E License a plus
• Petrochemical a plus
Minimum qualifications
Essential:
• BSEE
• Minimum 10 years experience

Desirable:
• Engineering experience in design and specification of industrial systems in marine/petrochemical environments
• Instrumentation system experience
• PE License
Additional details
Company offers
• Competitive base compensation package
• 100% Company paid premiums for employee and family that includes: medical (PPO), prescription, dental and vision coverage
• Short-term disability / salary continuation
• Long-Term disability (optional)
• Employee assistance program
• Life Insurance and optional Supplemental AD&D
• 401(k) with 50% match up to 6% of base pay
• Flexible Spending Accounts (Health and Dependent Care)
• Employee Company Share Purchase program
• Professional development (training programs, tuition reimbursement)
• Annual goal sharing program
• Flexible working hours in most locations

Apply to this job

[full-time] Asset Engineer at Streamline Resources

2008-09-13 16:04:11

Location: New York
Description:
Role Part of the asset engineering / asset management team within our transportation business group in North America. Key role objective To perform project engineering tasks in support the development of the Asset Engineering / Asset Management group from the New York Office. Job requirements Technical / professional expertise Roles require assisting with projects or packages involving application of materials technology expertise mainly related to concrete structures. An understanding of the lifecycle of infrastructure assets is preferred. It is essential that the candidate have an interest in condition surveys of existing structures and repairs as well as having knowledge of construction best practice. • Technical report writing – essential • Life-cycle cost analysis Bachelor’s degree in engineering or sciences. The following experience is a plus: • qualified engineer or engineer in training • planning and implementation of condition surveys and structural assessments (e.g. bridge assessments) • deterioration modelling of concrete / * durability design and planning / * use of concrete admixtures and cement replacement materials • review and approval of project material submissions / * Failure investigations • design specification and supervision of repair and upgrading structures • preparation of project specifications for high performance concrete (high durability, low heat, slip forming) • thermal modelling for large concrete pours and design of mitigation measures We offer • Competitive base compensation package • 100% Company paid premiums for employee and family that includes: medical (PPO), prescription, dental and vision coverage • short-term disability / salary continuation • long-Term disability (optional) • employee assistance program • life Insurance and optional Supplemental AD&D • 401(k) with 50% match up to 6% of base pay • flexible Spending Accounts (Health and Dependent Care) • employee Share Purchase program • professional development (training programs, tuition reimbursement) • annual goal sharing program • flexible working hours in most locations • employee referral program

Part of the asset engineering / asset management team within our transportation business group in North America.
Key role objective
To perform project engineering tasks in support the development of the Asset Engineering / Asset Management group from the New York Office.
Job requirements
Technical / professional expertise
Roles require assisting with projects or packages involving application of materials technology expertise mainly related to concrete structures. An understanding of the lifecycle of infrastructure assets is preferred.
It is essential that the candidate have an interest in condition surveys of existing structures and repairs as well as having knowledge of construction best practice.
• Technical report writing – essential
• Life-cycle cost analysis
Bachelor’s degree in engineering or sciences.
The following experience is a plus:
• qualified engineer or engineer in training
• planning and implementation of condition surveys and structural assessments (e.g. bridge assessments)
• deterioration modelling of concrete / * durability design and planning / * use of concrete admixtures and cement replacement materials
• review and approval of project material submissions / * Failure investigations
• design specification and supervision of repair and upgrading structures
• preparation of project specifications for high performance concrete (high durability, low heat, slip forming)
• thermal modelling for large concrete pours and design of mitigation measures
We offer
• Competitive base compensation package
• 100% Company paid premiums for employee and family that includes: medical (PPO), prescription, dental and vision coverage
• short-term disability / salary continuation
• long-Term disability (optional)
• employee assistance program
• life Insurance and optional Supplemental AD&D
• 401(k) with 50% match up to 6% of base pay
• flexible Spending Accounts (Health and Dependent Care)
• employee Halcrow Share Purchase program
• professional development (training programs, tuition reimbursement)
• annual goal sharing program
• flexible working hours in most locations
• employee referral program

Apply to this job

[full-time] Principle Coastal Engineer/Planner at Streamline Resources

2008-09-13 16:01:31

Location: California
Description:

Due to expansion and growth, an exciting opportunity has arisen for two principal coastal engineers/planners to join our coastal team in their California office and support the growth of the North American coastal engineering planning and practice. The principal function of this role is to serve as the North American west coast coastal lead for project management, resource management and business development.
Essence of role – key accountabilities
Your priorities in this role will include:
• serve as senior coastal engineer/scientist in the California office, providing services for: coastal engineering and design, coastal restoration project design and analysis; environmental assessment; Coastal Zone Management Act and Clean Water Act permitting
• act in an independent manner to accomplish project tasks, receiving direction and oversight from the coastal resource manager and the West Coast regional director in the California office
• interact with clients, federal, state, and local governmental entities, and non-governmental organizations to identify innovative solutions to coastal challenges and to accomplish tasks
• maintain technical currency by actively participating in professional organizations
• maintain awareness of political and business developments that may impact or provide opportunities for the maritime business group in general, the coastal skill group in particular
• assist in developing and refining the business plan for the West Coast region as it relates to the coastal skill group
• assist in identification of potential commissions, development of proposals, and execution of project tasks for the maritime business group
Job requirements
Technical / professional expertise
The successful candidate should possess a relevant engineering, coastal or ocean science degree or equivalent and be able to demonstrate the following skills and knowledge:
• demonstrated experience in developing strategic coastal engineering and planning documents
• proven record in preparing and/or processing permits to comply with the Federal Coastal Zone Management Act and the Clean Water Act
• demonstrated experience in developing the business of engineering
• proven record in personnel management
• ability to present technical findings to a variety of audiences, including through multimedia presentations and written documents
Company offers
• Medical (PPO), prescriptions, dental and vision coverage (premiums paid 100% for employee and family)
• 401K Retirement Plan with 50% Company match up to 6% of salary
• Short-Term and Long Term Disability
• Flexible Spending Accounts (Health Care and Dependent Care)
• 24-Hour Employee Assistance Program
• Employee Share Purchase Program
• Tuition Reimbursement
• 8 paid holidays; Paid Time Off (PTO)
• Employee Referral Program/Bonus

Apply to this job